TEFABLOC™ soft TPE for 3D printing

New innovative solutions to expand the boundaries of 3D printing additive technology.

THERMOPLASTIC ELASTOMER (TPE) 

TEFABLOC™ product range is incorporating new formulations for 3D printing additive process, allowing to manufacture soft parts including seals, grip, joints, etc.

According to needs, these newly developed TEFABLOC™ product range offers chemical compatibility with other polymers for multi-material designs.


Video 3D printing FDM process using TEFABLOC™ TPE

 

 

TEFABLOC™ FOR 3D PRINTING: typical properties

 

PropertiesUnitMethodTEFABLOC™
Thermoplastic Elastomer
GRADES >SE6300CSE7300CSE9300C
MFR (230°C - 21.2 N)g/10 minISO1133150<150<150<
Densityg/cm3ISO1183
method­ A
0.890.890.89
DurometerShAISO7619 15 seconds607090
Flexural ModulusMPaISO178---
Tensile Strength at breakMPaISO37 type-1A
500 mm/min
338
ISO37 type-A
50 mm/mi
---
Tensile Elongation at break%ISO37 type-1A
500 mm/min
440250340
ISO37 type-A
50 mm/mi
---
Shade--Transl.Transl.Transl.

Remarks:
Values only describe typical properties and may not be considered as specifications.
Not all grades are available in all regions, please contact your local sales representative.