TEFABLOC™ TG - TPE with Renewable Carbon

TEFABLOC™ TG - TPE with Renewable Carbon

Thermoplastic Elastomer including: Bio-based materials and PIR (Post Industrial Recycling) / PCR (Post Consumer Recycling).

INCORPORATING RENEWABLE CARBON

The TEFABLOC ™ TG series are thermoplastic elastomers (TPE), partly made from biobased or recycled materials. Both origins are preserving the natural resources, and helping decouple from the sole use of fossil ressources. By using the carbon sources present in our next environment (bio-mass or recycling  streams), the raw materials used intend to make the TEFABLOC™ TG series closer to carbon neutrality, as TPEs contibuting to limit the green house gas (GHG) emissions.   

Designed in the spirit of the KAITEKI (1) concept, they are an alternative to conventional TPEs, without compromising on performances.

 (1) KAITEKI is an original concept of the Mitsubishi Chemical Holdings Corporation Group, that proposes a way forward in the sustainable development of society and the planet, in addition to serving as a guide for solving environmental and social issues (to learn more about KAITEKI).

1. UP TO 70% RECYCLING CONTENT

TEFABLOC™ TGSI R02/R03 offer respectively 70% and 53% of PIR (Post Industrial Recycling) and PCR (Post Consumer Recycling).

These SEBS grades are available in a broad hardness range, with high flow rate and cohesive bonding to polyolefin. The low emission level (low smell) and the compliance with European regulations about human skin contact make them particularly interesting for in home and consumer applications, such like bodycare, tools, furnitures etc..

 

TEFABLOC™ TG with recycled content
TG SI R02TG SI R03
PIR/PCR70%53%
HARDNESS RANGE45 - 60 - 80 ShA45 - 60 - 80 ShA
COLOURING* * ** *
SHADETranslucentOpaque
FLOW* * ** *
2K ADHESIONPPPP

2. BIO-SOURCED CONTENT

TEFABLOC™ TGSI A06 75A is a thermoplastic elastomer partly made of bio-sourced materials.

It offers a appreciable level properties, with smooth aspect and easy coloring, including with bright colours.

High flow rate and cohesive bonding to polyolefins (PE & PP) make it recommended for long run channels.
TGSI A06 75A is also complying with European regulations about human skin contact.

 

TEFABLOC™ TG with bio-sourced content
TG SI A06
BIO-SOURCED40%
HARDNESS RANGE75 ShA
COLOURING* * *
SHADEOpaque
FLOW* * *
2K ADHESIONPP / PE

These grades are just examples, please contact us for any special need, we will be please to offer you an adapted solution to your requirement.

 


Note : 3D printing fabrication may be achieve through different process, among them FFF (Fused Filament Fabrication) and FGF (Fused Granule Fabrication) are the most current. MCPP is providing adapted solutions for FGF, and is a major supplier for the FFF industry.

MCPP FFF (Fused Filament Fabrication) solutions, please visit MCPP 3DP dedicated pages

West Wast Print is a French company offering 3DP services based on FGF technology.

Haupteigenschaften

  • Biobasiert Biobasiert
  • Softness Softness
  • Flexibilität, Softness bei niedrigen Temperaturen Flexibilität, Softness bei niedrigen Temperaturen